Your network contains a RADIUS server named Server1.
You install a new server named Server2 that runs Windows Server 2012 R2 and has Network Policy Server (NPS) installed.
You need to ensure that all accounting requests for Server2 are forwarded to Server1. On Server2, you create a new remote RADIUS server group named Group1 that contains Server1.
What should you configure next on Server2?
To answer, select the appropriate node in the answer area.
Connection request policies are sets of conditions and settings that allow network administrators to designate which Remote Authentication Dial-In User Service (RADIUS) servers perform the authentication and authorization of connection requests that the server running Network Policy Server (NPS) receives from RADIUS clients. Connection request policies can be configured to designate which RADIUS servers are used for RADIUS accounting. http://technet.microsoft.com/en-us/library/cc753603.aspx
Your network is configured as shown in the exhibit. (Click the Exhibit button.)
Server1 regularly accesses Server2.
You discover that all of the connections from Server1 to Server2 are routed through Router1.
You need to optimize the connection path from Server1 to Server2.
Which route command should you run on Server1?
A. Route add -p 10.10.10.0 MASK 255.255.255.0 10.10.10.1 METRIC 50
B. Route add -p 10.10.10.0 MASK 255.255.255.0 172.23.16.2 METRIC 100
C. Route add -p 10.10.10.12 MASK 255.255.255.0 10.10.10.1 METRIC 100
D. Route add -p 10.10.10.12 MASK 255.255.255.0 10.10.10.0 METRIC 50
destination – specifies either an IP address or host name for the network or host.
subnetmask – specifies a subnet mask to be associated with this route entry. If subnetmask is not specified, 255.255.255.255 is used.
gateway – specifies either an IP address or host name for the gateway or router to use when forwarding.
costmetric – assigns an integer cost metric (ranging from 1 through 9,999) to be used in calculating the fastest, most reliable, and/or least expensive routes. If costmetric is not specified, 1 is used.
interface – specifies the interface to be used for the route that uses the interface number. If an interface is not specified, the interface to be used for the route is determined from the gateway IP address.
Drag and Drop Question
You administer a Microsoft SQL Server database. Service accounts for SQL Agent are configured to use a local user. A Microsoft SQL Server Integration Services (SSIS) job step has been created within a SQL Server Agent job. The SSIS package accesses a network share when exporting data from a SQL Server database. When you execute the SQL Server Agent job, it fails due to a permissions failure on a share on a remote server. You need to ensure that the SQL Server Agent job can execute the SSIS package. Which four actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
You administer a Microsoft SQL Server 2012 database named Contoso on a server named Server01. You need to diagnose deadlocks that happen when executing a specific set of stored procedures by recording events and playing them back on a different test server. What should you create?
A. an Extended Event session
B. a Policy
C. a Database Audit Specification
D. an Alert
E. a Server Audit Specification
F. a SQL Profiler Trace
G. a Resource Pool
You administer a Microsoft SQL Server 2012 database that contains a table named OrderDetail. You discover that the NCI_OrderDetail_CustomerID non-clustered index is fragmented. You need to reduce fragmentation. You need to achieve this goal without taking the index offline. Which Transact-SQL batch should you use?
A. CREATE INDEX NCI_OrderDetail_CustomerID ON OrderDetail.CustomerID WITH DROP EXISTING
B. ALTER INDEX NCI_OrderDetail_CustomerID ON OrderDetail.CustomerID REORGANIZE
C. ALTER INDEX ALL ON OrderDetail REBUILD
D. ALTER INDEX NCI_OrderDetail_CustomerID ON OrderDetail.CustomerID REBUILD
Your company has a private cloud that contains a System Center 2012 Orchestrator infrastructure. You are creating a runbook named runbook1.
You need to ensure that the workflow starts when a file is added to a folder. From which category should you add an activity? To answer, select the appropriate category in the answer area.
A runbook can only have one starting point. A starting point is an activity that automatically runs when the runbook is started. Each activity in the runbook runs after the previous activity in the workflow is complete.
If a runbook starts with any activity other than a monitor, the runbook begins processing and attempts to run to completion. If the runbook starts with a monitor activity, the monitor loads and
waits for the trigger condition. Once the condition is met, a runbook instance is created to run the remaining activities in the runbook. The monitor continues to run and wait another occurrence of the trigger condition. Runbooks that start with monitors continue to run until you stop them from the Runbook Designer or Orchestration console.
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. You plan to deploy a single-tier service to the private cloud. The service is configured to use Network Load Balancing (NLB). You need to create a Hardware Profile for the virtual machines that will be added to the service template. The solution must ensure that the virtual machines will use Windows Network Load Balancing. Which settings should you configure in the Hardware Profile? To answer, configure the four appropriate settings in the dialog box in the answer area.
Your company has a private cloud that contains two Active Directory forests named contoso.com and adatum.com. The contoso.com network and the adatum.com network are separated by a firewall.
No trusts exist between the forests.
You deploy System Center 2012 Operations Manager to adatum.com.
You install agents on 100 servers in both forests.
You need to ensure that you can monitor all 100 servers. The solution must minimize the traffic between the two networks.
What should you install? (Each correct answer presents part of the solution. Choose all that apply.)
A. A server certificate on the gateway server in contoso.com
B. A gateway server in adatum.com
C. A server certificate on the gateway server in adatum.com
D. Client certificates on all of the servers in adatum.com
E. A gateway server in contoso.com
F. A server certificate on the management server in adatum.com
G. Client certificates on all of the servers in contoso.com
You need to implement a solution for the email attachments.
Both organizations exchange root CA certificates and install the certificates in the relevant stores.
You duplicate the Enrollment Agent certificate template and generate a certificate based on the new template.
Which additional two actions should you perform? Each Answer presents part of the solution.
A. Request cross-certification authority certificates.
B. Create Capolicy.inf files.
C. Request subordinate CA certificates.
D. Create Policy.inf files.
Your network contains an Active Directory domain. The domain contains 10 file servers. The file servers connect to a Fibre Channel SAN.
You plan to implement 20 Hyper-V hosts in a failover cluster.
The Hyper-V hosts will not have host bus adapters (HBAs).
You need to recommend a solution for the planned implementation that meets the following requirements:
The virtual machines must support live migration.
The virtual hard disks (VHDs) must be stored on the file servers.
Which two technologies achieve the goal? Each correct answer presents a complete solution.
A. Cluster Shared Volume (CSV)
B. An NFS share
C. Storage pools
D. SMB 3.0 shares
Your network contains an Active Directory forest. The forest contains two domains named contoso.com and fabrikam.com. The forest functional level is Windows 2000. The contoso.com domain contains domain controllers that run either Windows Server 2008 or Windows Server 2008 R2. The domain functional level is Windows Server 2008. The fabrikam.com domain contains domain controllers that run either Windows 2000 Server or Windows Server 2003. The domain functional level is Windows 2000 native. The contoso.com domain contains a member server named Server1 that runs Windows Server 2012 R2. You need to add Server1 as a new domain controller in the contoso.com domain. What should you do first?
A. Raise the functional level of the contoso.com domain to Windows Server 2008 R2.
B. Upgrade the domain controllers that run Windows Server 2008 to Windows Server 2008 R2.
C. Raise the functional level of the fabrikam.com domain to Windows Server 2003.
D. Decommission the domain controllers that run Windows 2000.
E. Raise the forest functional level to Windows Server 2003.
D. Server 2003 is the minimum Domain Functional level for any domain in the forest Windows Server 2012 R2 requires a Windows Server 2003 forest functional level. That is, before you can add a domain controller that runs Windows Server 2012 R2 to an existing Active Directory forest, the forest functional level must be Windows Server 2003 or higher.