QUESTION 131
Which of the following are H.245 standard functions? (Choose 2)
A. CODEC negotiations between calling and called party
B. H.225 UDP port call setup negotiations between calling and called party
C. IP port negotiations between calling and called party
D. IP phone on-hook and off-hook signal exchange
E. IPaddress exchange and UDP port negotiations between calling and called party
Answer: AE
QUESTION 132
Choose which one of these, that is NOT a valid CallManager service parameter:
A. Cisco RTMT Data Collector
B. Cisco Database layer Monitor
C. Cisco Serviceability Reporter
D. Cisco Telephony Call Dispatcher
E. Cisco Webdialer
F. Cisco IP Manager Assistant
Answer: A
QUESTION 133
An IPCC script is configured with a DB Read to check to see if it is a holiday. Calls to the database fail intermittently. Which trace should be enabled to troubleshoot this issue?
A. Database Layer Monitor
B. CTI Manager
C. RIS Data Collector
D. SS_DB
Answer: D
QUESTION 134
Suppose the following command is configured in a gatekeeper: “bandwidth total default 64′. Which statement would be TRUE?
A. This gatekeeper will admit up to 64 calls, regardless of the codec used.
B. This gatekeeper will not admit any calls because all calls initially account of 128Kbps.
C. This gatekeeper will admit a minimum of 4 calls using G.729 codec.
D. This gatekeeper will admit up to 4 calls using G.729 codec.
Answer: D
QUESTION 135
Design a WAN edge LLQ/CBWFQ policy to accommodate voice, call-signaling, transactional data, bulk data, best effort and a “less than Best Effort” scavenger traffic class. Enable class-based cRTP on the voice class. Enable RFC 2597 congestion avoidance techniques only on application classes assigned an AF PHProvision a “less than Best Effort” queuing policy for scavenger traffic (assume a non-distributed router platform). Also assume that these traffic classes have been correctly classified and marked according to Cisco’s best practices. Which option meets this criteria?
A. policy-map WAN-EDGE-QUEUING
class VOICE
priority percent 33
ip rtp header-compression
class CALL-SIGNALING
bandwidth percent 5
random-detect dscp-based
class TRANSACTIONAL-DATA
bandwidth percent 26
random-detect dscp-based
class BULK-DATA
bandwidth percent 10
random-detect dscp-based
class SCAVENGER
bandwidth percent 1
class class-default
faor-queue
random-detect, dscp-based
B. policy-map WAN-EDGE-QUEUING
class VOICE
priority percent 33
compression header ip rtp
class CALL-SIGNALING
bandwidth percent 5
class TRANSACTIONAL-DATA
bandwidth percent 26
random-detect dscp-based
class BULK-DATA
bandwidth percent 10
random-detect dscp-based
class SCAVENGER
bandwidth percent 1
class class-default
bandwidth percent 25
C. policy-map WAN-EDGE-QUEUING
class VOICE
priority percent 33
ip rtp header-compression
class CALL-SIGNALING
bandwidth percent 5
dscp-based random-detect
class TRANSACTIONAL-DATA
bandwidth percent 26
dscp-based random-detect
class BULK-DATA
bandwidth percent 10
dscp-based random-detect
class SCAVENGER
bandwidth percent 1
class class-default
fair-queue
D. policy-map WAN-EDGE-QUEUING
class VOICE
priority percent 33
ip rtp header-compression
class CALL-SIGNALING
bandwidth percent 5
dscp-based random-detect
class TRANSACTIONAL-DATA
bandwidth percent 26
dscp-based random-detect
class BULK-DATA
bandwidth percent 10
dscp-based random-detect
class SCAVENGER
bandwidth percent 1
dscp-based random-detect
class class-default
fair-queue
random-detect dscp-based
Answer: B
QUESTION 136
Which of the following is true about the 802.1q frame header?
A. In an Ethernet frame after the source address, 6 bytes 802.1Q header is included, which contains
32 bits for the tag protocol ID, 3 bits for the priority field, 1 bit for the canonical field (always 0), and
12 bits for the VLAN identifier.
B. In Ethernet frame after the source address, 4 bytes 802.1Q header is included, which contains 16
bits for the tag protocol ID, 3 bits for the priority field, 1 bit for the canonical field (always 0), and 12
bits for the VLAN identifier.
C. 802.1q frame is inserted at the beginning of Ethernet frame. Size of 802.1q frame is 4 bytes.
D. 802.1q frame is inserted inside the actual Ethernet frame. In other words, it is inserted after Source
Address in the Ethernet frame. Size of 802.1q frame is 26 bytes.
Answer: B
QUESTION 137
A Unity server is being deployed in a dual integration with CallManager and a PBX. The PBX integration will utilize a PBXLink. Which two of the following statements are true? (Choose 2)
A. The CallManager integration must be completed first.
B. PCI voice cards are not required for the Unity server.
C. Each PBXLink port will connect to an analog port in the PBX.
D. The PBX and the PBXLink must be co-located.
E. The PBXLink will communicate with Unity using SMDI.
Answer: DE
QUESTION 138
If all n MTP transcoding sessions are utilized, and an n + 1 connection is attempted how will the next call be treated?
A. The next call will not use an MTP and will use the transcoding resources associated with the codec to
complete the call.
B. The next call will be redirected to the PSTN due to a lack of MTP resources.
C. The next call will use the alternate codec type and attempt to complete the call
D. The next call will complete without using the MTP transcoding resource
Answer: D
QUESTION 139
Which of the following does NOT describe the Calling Search Space function in CM properly?
A. The Calling Search Space defines what numbers are available to a device to call.
B. Calling Search Space is a grouping of partitions to look through when making a call.
C. Each directory number has CSS.
D. The CSS defines Route Patterns and Directory Numbers calls can be received from.
E. CSS defines search for directory numbers in assigned partitions according to dial patterns.
Answer: D
QUESTION 140
When configuring ICD, which of the following must be associated with the JTAPI user? (Choose Two)
A. Agent devices
B. Agent ICD numbers
C. CTI Ports
D. CTI Route Points
E. Hunt Pilot
Answer: CD
If you want to pass the Cisco 350-030 Exam sucessfully, recommend to read latest Cisco 350-030 Dumpfull version.
