Free 2014 Cisco 200-101 Dump (51-60) Download!

QUESTION 51
What information does a router running a link-state protocol use to build and maintain its topological database? (Choose two.)

A.    hello packets
B.    SAP messages sent by other routers
C.    LSAs from other routers
D.    beacons received on point-to-point links
E.    routing tables received from other link-state routers
F.    TTL packets from designated routers

Answer: AC
Explanation:
http://www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094e9e.shtml

QUESTION 52
Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0? (Choose two.)

A.    Router(config)# router ospf 0
B.    Router(config)# router ospf 1
C.    Router(config)# router ospf area 0
D.    Router(config-router)# network 192.168.16.0 0.0.0.255 0
E.    Router(config-router)# network 192.168.16.0 0.0.0.255 area 0
F.    Router(config-router)# network 192.168.16.0 255.255.255.0 area 0

Answer: BE
Explanation:
In the router ospf
command, theranges from 1 to 65535 so o is an invalid number – B is correct but A is not correct. To configure OSPF, we need a wildcard in the “network” statement, not a subnet mask. We also need to assgin an area to this process – E is correct.

QUESTION 53
Which type of EIGRP route entry describes a feasible successor?

A.    a backup route, stored in the routing table
B.    a primary route, stored in the routing table
C.    a backup route, stored in the topology table
D.    a primary route, stored in the topology table

Answer: C
Explanation:
Feasible successor is a route whose Advertised Distance is less than the Feasible Distance of the current best path. A feasible successor is a backup route, which is not stored in the routing table but stored in the topology table.

QUESTION 54
Drag and Drop Question
Drag each description on the left to the appropriate term on the right. Not all the descriptions are used.

clip_image002[4]
Answer:

clip_image001
Explanation:
http://www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094e9e.shtml http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfospf.html

QUESTION 55
Drag and Drop Question
Drag the term on the left to its definition on the right (Not all options are used.)

clip_image002[6]
Answer:

clip_image001[4]
Explanation:
Poison reverse: A router learns from its neighbor that a route is down and the router sends an update back to the neighbor with an infinite metric to that routeLSA: The packets flooded when a topology change occurs, causing network routers to update their topological databases and recalculate routes
Split horizon: This prevents sending information about a routeback out the same interface that originally learned about the route holddown timer: For a given period, this causes the router to ignore any updates with poorer metrics to a lost network

QUESTION 56
Drag and Drop Question
Drat the description on the left to the routing protocol on the right. (Not all options are used.)

clip_image002[8]
Answer:

clip_image001[6]

QUESTION 57
Drag and Drop Question
Drat the Frame Relay acronym on the left to match its definition on the right. (Not all acronyms are used)

clip_image002[10]
Answer:

clip_image001[8]
Explanation:
Enhanced Interior Gateway Routing Protocol (EIGRP) is a Cisco proprietary routing protocol, so it is vendor-specific. By default, EIGRP internal routes have an administrative distance value of 90. OSPF uses cost as its metric. By default, the cost of an interface is calculated based on bandwidth with the formula cost= 10000 0000/bandwidth (in bps). OSPF elects a DR on each broadcast and nonbroadcast multiaccess networks (like Ethernet and Frame Relay environments, respectively). It doesn’t elect a DR on point-to-point link (like a serial WAN).

QUESTION 58
Hotspot Question

clip_image001[10]

clip_image002[12]
OSPF is configured using default classful addressing. With all routers and interfaces operational, how many networks will be in the routing table of R1 that are indicated to be learned by OSPF?

A.    2
B.    3
C.    4
D.    5
E.    6
F.    7

Answer: C
Explanation:
It already knows about its directly connected ones, only those not directly connected
are “Learned by OSPF”.
OSPF as a link state routing protocol (deals with LSAs rather than routes) does not auto summarize (doesn’t support “auto-summary”).So learned route by OSPF are followed 172.16.2.64/26
172.16.2.228/30
172.16.2.232/30
172.16.3.0/24

QUESTION 59
Hotspot Question

clip_image001[12]

clip_image002[14]
After the network has converged, what type of messaging, if any, occurs between R3 and R4?

A.    No messages are exchanged.
B.    Hellos are sent every 10 seconds.
C.    The full database from each router is sent every 30 seconds.
D.    The routing table from each router is sent every 60 seconds.

Answer: B
Explanation:
HELLO messages are used to maintain adjacent neighbors so even when the network is converged, hellos are still exchanged. On broadcast and point-to-point links, the default is 10 seconds, on NBMA the default is 30 seconds.

QUESTION 60
Hotspot Question

clip_image001[14]

clip_image002[16]
To allow or prevent load balancing to network 172.16.3.0/24, which of the following commands could be used in R2? (Choose two.)

A.    R2(config-if)#clock rate
B.    R2(config-if)#bandwidth
C.    R2(config-if)#ip ospf cost
D.    R2(config-if)#ip ospf priority
E.    R2(config-router)#distance ospf

Answer: BC
Explanation:
http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfospf.html#wp1018072

If you want to pass the Cisco 200-101 Exam sucessfully, recommend to read latest Cisco 200-101 Dumpfull version.

clip_image001